Issue 68

Now in this issue we will work a little on the rear shell. First off, we take the following two body parts shown:

Now flip them over, and use one of the straight connectors shown (please note these only fit one way, so make sure the holes are lined up properly):

You should have gotten a bunch of long gold screws. You'll use them all for this. Let's start with securing this panel:

Now another straight connector on the side:

And a curved connector on top as shown:

This piece attaches to that (note you may have to do some finagling to get this new piece flush with the lower part):

And here's the end result seen from the top.