Issue 89

Well, we must be getting near the end, because it's time to fill in the interior. First off, the window to the lower turret (the windows are optional, but they do keep the dust out so I'll put this one in at least, and see how the top one looks):

Then, the bottom turret gets glued in. Note the notch at the bottom of the circle: this shows you how to line it up properly.

The turret light gets plugged in here:

Now for the interior areas. First off, if you haven't fastened these two corridor sections together, this would be the time to do that thing.

Next, glue this large base under the hold:

And these two under your corridor assembly:

Now, test fit time. We're not gluing just yet, but do make sure you can put the hold in the proper place, and the two different corridor assemblies:

Now that's done, it's time to add two supports to the assembly, as shown here:

And that's it. I have a feeling this thing is going to start coming together very quickly, now.